1:1 Mix Ratio High Solids Low Odor Polyaspartic Floor Coating
Product Descriptions:
|
Product Name
|
Polyaspartic Clear Coat |
|
Drying time (25℃)
|
Touch dry≤2 hours / Hard dry≤12 hours
|
|
Viscosity (25℃), cps
|
Part A 200, Part B 250
|
|
Solid Content, %
|
100
|
|
Hardness, shore D
|
≥50
|
|
Coverage (advise 2 coats)
|
0.3kg/sqm per coat
|
Quick Details:
Polyaspartic can be applied up to 16 mils thick in a single pass to seal floors broadcast with Decorative Chip, decorative quartz and silica sand. It can be applied in a wide range of temperatures and dries to a hard, non-yellowing finish with superior chemical resistance that can be used in both indoor and outdoor applications. Because of the high build that can be achieved in a single pass, and the wide range of application temperatures, installation, and return to service time is greatly reduced over other coatings.
Features:
1. Fast cure times with excellent adhesion
2. Low Odor, No VOC
3. Superior chemical resistance
4. Superior abrasion resistance
5. Nonyellowing and good gloss retention
6. Easy to mix 1:1 ratio by volume
Advantages:
The cross linking of the Polyaspartic series film in the cure makes it exceptionally tough and durable, making it four times more abrasion resistant than normal epoxy. The chemistry is based upon polyaspartic and much attention has been given to the application and installation attributes in its formulation. As a result, the Polyaspartic clear topcoat is extremely user friendly without having sacrificed the performance of the finished floor coating product. The applications for this product are almost limitless. Polyaspartic is suited for use on high-end residential flooring applications, retail floor settings with high traffic, or food service floor areas where stain resistance and cleanability are paramount.
Product Tags:
|
|
High Solids Polyaspartic Floor Coating / Paint Low Odor 1:1 Mix Ratio Images
|
